NB-IoT物聯網水表
- 產品特點
- 周期上報:默認24小時上傳一次數據,時間上離散,保證項目區域內的遠傳水表都能正常上傳數據;
- 上傳數據內容:數據包含NB信號數據、周期采樣數據、上傳當前采樣數據、告警數據、電池電壓以及NB模組信息;
- 藍牙上報:增加藍牙通道,使水表上傳當前數據;
- 數據存儲:斷電情況下,表內數據須至少保存十年;能夠保證再次通電后數據自動恢復;報警功能:當遠傳水表出現電池電壓低、存儲故障、采樣;
- 出現故障、閥門故障等問題時上報異常數據至后臺系統;
- 閥門控制:可遠程或者手持設備控制水表閥門的開和關。
Periodic reporting: By default, data is uploaded every 24 hours, with discrete time intervals to ensure that all remote water meters within the project area can upload data normally;
Upload data content: The data includes NB signal data, periodic sampling data, uploaded current sampling data, alarm data, battery voltage, and NB module information;
Bluetooth reporting: Add Bluetooth channel to enable the water meter to upload current data;
Data storage: In case of power outage, the data in the table must be stored for at least ten years; Can ensure automatic data recovery after power on again; Alarm function: When the remote water meter experiences low battery voltage, storage failure, or sampling;
Report abnormal data to the backend system when problems such as malfunctions or valve malfunctions occur;
Valve control: The opening and closing of water meter valves can be controlled remotely or by handheld devices.
產品參數 Product parameters |
參數值 Parameter values |
---|---|
工作頻段 Working frequency band |
B3、B5、B8(國內)、 B20、B28(國外)國內外專網 |
工作電壓 Working voltage |
2.7~3.6V |
靜態功耗 Static power consumption |
<10uA |
發射電流 Emission Current |
<280mA |
接收電流 Receiving Current |
<100mA |
發射功率 Transmission power |
23dBm |
信號靈敏度 Signal sensitivity |
-128±1dBm |
工作溫度 Operation temperature |
-20~75°℃ |
工作濕度 Working humidity |
0~95%,無冷凝 No condensation |
喚醒時間 Wake-up time |
定時喚醒、實時觸發 Timed wake-up and real-time triggering |
無線阻抗 Wireless impedance |
50Ω |